Bonded Logic Inc 60600-11212 Manuel d'instructions télécharger pdf

Installation Instructions:

Sound control applications can vary by room shape, size, and usage. The information listed here is a

general purpose guide, intended to offer broad spectrum advice

UltraSonic Acoustic Panels should be placed a minimum of 16” from the ceiling

and ﬂoor, allowing for both aesthetic and performance advantages. When choosing

placement, the most effective areas are the ﬁrst points of sound reﬂection. An example

includes wall surfaces that directly receive sound from a speaker. Be sure to include

corner placements in your design, as these areas prove especially effective.

Once you have decided on placement of your panels, prepare the panels for

mounting. For easy installation, two 3M Command Strip adhesive mounts per panel

are included.

The Command Strips should be applied 3” from the top of the panel and 3”

from each side of the panel. Simply expose one adhesive side of the Command Strip and

apply to the wall facing surface of the panel. Now, remove the backing from the remaining

surface and apply to the wall with ﬁrm pressure.

Your UltraSonic Acoustic Panels are now mounted to your wall, providing

improved acoustic conditions. Should you ever have a need to remove your acoustic

panels, simply lift the bottom edge of the panel until you can reach the tab found at the

bottom of the Command Strips. Release the adhesive by gently pulling the tab down and

remove the panels without damage to the mounting surface.

™

Installation Instructions:Sound control applications can vary by room shape, size, and usage. The information listed here is a general purpose guide,

Pas de commentaire

Bonded Logic Inc 60600-11212 Manuel d'instructions